About Us

Design Principals of our Fountains

Water in Motion is our slogan. We would like to bring the soothing sound of moving water to you.

The simplicity of our fountain design (there is beauty in simplicity) emphasizes the focus on the moving water and away from the fountain structure. After all, the key element of any fountain is water. So we try to move as much water as possible within the design frame, a little trickle of water here and there “doesn’t flow” well with us.

The fountain body is made 100% of Stainless Steel (welded construction), a highly corrosion resistant steel that will last for centuries; or Copper (not recommended for ponds containing fish) that will over time form a natural brownish/green patina. All fountains are self-supporting and embedded in a concrete base.

Of course you need a pump to move water. All our fountains are equipped with very efficient, high quality magnetic drive, submersible pumps, that will give you years of continues service. Power consumption of the 102” and 62” high fountain is only 60 watts and 35 watts respectively! (For safety reasons a 110-volt ground fault outlet is required)

To ensure that you have years of trouble free service we equip all our outdoor fountains with our own pre filter that will effectively eliminate clogging of the pump or fountain. We suggest to clean and flush the pump and pre filter with clean water once a year in the spring or every 6,000 hours of operation.